Flame Retardant PBT,Fire Retardant Granule Manufacturer

Products

Home > Flame Retardant > Modified PBT > Glass Fiber 30 Reinforced & Flame Retardant PBT PBT-RG30

Glass Fiber 30 Reinforced & Flame Retardant PBT PBT-RG30

Our flame retardant PBT is environment friendly. It is characterized by high mechanical strength, good high-temperature resistance and good electrical properties. This type of flame retardant is widely applied to injection molding, household appliance parts, coil frame, lighting, electric relay and connector.

Properties of Glass Fiber 30 Reinforced & Flame Retardant PBT

Test Project	Test Methods	Unit	Typical Values [1]
Tensile Stress	GB/T1040-92	Mpa	≥100
Flexural Stress	GB/T9341-2000	Mpa	≥160
Flexural Modulus	GB/T9341-2000	Mpa	≥5000
Notched Impact Strength	GB/T1043-93	KJ/m²	≥6.0
Elongation At Break	GB/T1040-92	%	≥15
Heat Distortion Temperature	GB/T1634-2004	°C	≥200
MFR	GB/T3682-2000	g/10min	8-20
Flammability	GB/T2408-1996		V-0
Testing Condition	23±2°C, 50±5%RH

[1] Typical Values are average statistics in lab for reference. They are not used as products standards.
[2] Properties of coloring materials may be different from the statistics above.

Processing Conditions of Glass Fiber 30 Reinforced & Flame Retardant PBT

		Start Point	Range
Melt Temp.		240°C	235-255°C
Barrel Zone Temp.	Rear	230°C	220-240°C
	Center	235°C	230-250°C
	Front	245°C	240-260°C
Mold Temp.		50°C	40-60°C
Processing Temp. Limit		265°C
Injection Speed		Moderate to High
Pre-Dry Requirements		120-140°C, 4-6hr

Note: All the statistics above are for reference and can be adjusted according to different requirements.

In addition to flame retardant PBT, we at Lianlian also provide flame retardant PP, flame retardant PA6, and other fireproof products. If you are in need of these products, please feel free to call or email us! We are confident that our products will satisfy your needs.

Feedback Form